APPLICATIONS

.High-temperature components testing, and general use parts including HVAC, consumer appliances, motor enclosures, stators, etc.

. Low-pressure molding/tooling: expanding foams, rubbers, etc.

. Overmolding

BENEFITS

. Production-grade material

. High heat resistance for testing and use in high heat environments

. No secondary thermal post-cure required

. Excellent visualization for parts requiring evaluation of internal features and fluid flow performance

FEATURES

. HDT over 300 °C at both low and high stress (HDT at 0.455 and 1.82 MPa)

. Rigid and translucent

. High tensile modulus for use in molds (4000 MPa)

KEY MATERIAL PROPERTIES

The full suite of mechanical properties is given per ASTM and ISO standards where applicable. All parts are conditioned per ASTM recommended standards for a minimum of 40 hours at 23 ¡ÆC, 50% RH. Material properties include physical and mechanical properties, as well as thermal, UL flammability,and electrical (dielectric strength, dielectric constant, dissipation factor, and volume resistivity).

ISOTROPIC PROPERTIES

Figure 4 technology prints parts that are isotropic in mechanical properties meaning the parts printed along either the XYZ axis will give similar results. Parts do not need to be oriented to get the highest mechanical properties, further improving the degree of freedom for part orientation for mechanical properties.

TECHNICAL SPECIFICATIONS

KEY MECHANICAL PROPERTIES

. Elongation at break: 2.6%

. Tensile modulus: 4000 MPa

. Impact strength (notched Izod): 10 J/m

. Heat Deflection Temperature @ 0.455 and 1.82MPa: >300 °C